Chip Spreader,Chip Spreader DAS-3000

The DAS-3000 chip spreader is mainly used to spreading chips after the asphalt spraying work for prime coat, tack coat and water-proof coat in road construction of high level.
Spreading Width mm 3000
Spreading Speed km/h 3~4.8
Maximum Spreading Quantity L/m2 22
Minimum Spreading Quantity L/m2 3
Chipping Size mm 3~25

Product details description

The DAS-3000 chip spreader is mainly used to spreading chips after the asphalt spraying work for prime coat, tack coat and water-proof coat in road construction of high level. It also can be used for the construction work of country road with smaller traffic flow. Pls. see figure 1 for the outline of the chip spreader.
Our DAS-3000 Chip Spreader is designed in hanging structure. It is hanged at the back end of the dumper truck to work with the tilter to be lift up at 35°~45°. The spreading rate can be adjusted through the changing of gate openness and motor speed. These two methods should be done at the same time. The spreading width and position can be managed by opening and closing of the specified nozzles.
1.Main Technical Parameter


No.

Item Name

Unit

Standard Value

Remark

  1.  

Spreading Width

mm

3000

250-3000(Grade Difference:250)

  1.  

Spreading Speed

km/h

3~4.8

 

  1.  

Maximum Spreading Quantity

L/m2

22

 

  1.  

Minimum Spreading Quantity

L/m2

3

 

  1.  

Chipping Size

mm

3~25

 

  1.  

Overall Dimensions

mm

2700×2100×1850

 

  1.  

Total Mass

kg

1100

 

2.Performance Feature
2.1. The aggregate size of available spread is large enough to meet the requirements of various aggregate spread demand.
2.2. The amount of spread is not affected by the speed of the vehicle, spread the aggregate evenly.
2.3. The speed of the screw is synchronized with the speed of the material, which is good for the feed.

3.Construction Samples

 1139.jpg

Note: All Specifications are subject to change without Notice

INQUIRY DETAILS